CS

Zoomlion ZT20J Spare Parts

Quote after compatibility confirmation by machine model, engine model and part number.

Sourcing Parts for Zoomlion ZT20J

The pages below cover common wear and maintenance parts for Zoomlion ZT20J. Every quote is confirmed against the machine nameplate, engine model and OEM part number to avoid mismatched shipments.

To get a quote, send the ZT20J nameplate photo, OEM part numbers, quantity and destination port.

Request a ZT20J Parts Quote
Zoomlion Boom Lift Joystick for Zoomlion ZT20J

Electrical parts

Zoomlion Boom Lift Joystick

Joystick and control parts for Zoomlion aerial work platform maintenance. These are boom lifts — the ZT20J is a telescopic machine at 12.2 t with a 454 kg platform rating and the ZA18J is an articulating one — and their control parts do not carry over to the ZS-series scissor lifts, which use a different platform control box entirely. Proportional joysticks are matched by the number of axes, the enable and trigger switch arrangement, and the controller they signal to; the platform box and the ground control box take different units even on the same machine. Send a photograph of the existing joystick with its connector visible, plus the platform nameplate. Before replacing one, check the harness at the platform gooseneck: it flexes on every cycle and is a more common cause of an intermittent control fault than the joystick itself.

Zoomlion ZT20J Specifications and Selection Notes

Operating weight12,200 kg
Factory engineDeutz D447 L4 or Perkins 404D-22T, depending on build
Platform rated load454 kg
Production statusCurrently in production

How ZT20J Differs From the Rest of the Range

  • A telescopic boom lift, not a scissor lift — the ZS-series scissor machines share almost none of its wear parts.
  • Shipped with either a Deutz D447 L4 or a Perkins 404D-22T. These are different engine families, so always read the engine plate before quoting engine parts.

Figures compiled from Chinese equipment databases. Manufacturers ship several configurations under one model code, and engine options in particular change the parts that fit — confirm against the machine nameplate and engine plate before ordering.

Commonly Replaced Parts on Zoomlion ZT20J

For Zoomlion ZT20J boom lifts — telescopic and articulating alike — control, safety and boom parts drive most orders. Quotes are confirmed against the platform nameplate and OEM part numbers.

  • Joysticks, control handles and platform control box parts
  • Limit switches, angle sensors and load sensing parts
  • Boom lift cylinder seal kits and wear pads
  • Slewing ring and slew drive parts
  • Hydraulic pumps and valve blocks
  • Engine parts by the engine plate, not the machine model
  • Axle, drive motor and brake parts

This list covers typical wear items for this machine category. Availability for a specific part is always confirmed against the OEM part number.

ZT20J Sourcing FAQ

Do you supply spare parts for Zoomlion ZT20J?

Yes. Quote-ready ZT20J parts currently include Zoomlion Boom Lift Joystick and more. Other parts can be confirmed with an OEM part number.

How do I confirm part compatibility for ZT20J?

Send the ZT20J nameplate photo, engine model and OEM part number. We confirm compatibility before quoting to avoid mismatched shipments.

How are ZT20J parts shipped?

Parts ship with export packing by sea or air depending on weight, volume and lead time, with destination port costs confirmed in the quote.

What are the most commonly replaced parts on Zoomlion ZT20J?

Frequent replacements on this boom lift include joysticks, control handles and platform control box parts, limit switches, angle sensors and load sensing parts, boom lift cylinder seal kits and wear pads, slewing ring and slew drive parts, hydraulic pumps and valve blocks and more, always confirmed against the OEM part number.

Other Zoomlion Models

ZTC250VZTC550VQY25VHBT80.16.174RSUZA18JZS0607ZS0808ZS1414