Zoomlion ZS0607 Spare Parts
Quote after compatibility confirmation by machine model, engine model and part number.
Sourcing Parts for Zoomlion ZS0607
The pages below cover common wear and maintenance parts for Zoomlion ZS0607. Every quote is confirmed against the machine nameplate, engine model and OEM part number to avoid mismatched shipments.
To get a quote, send the ZS0607 nameplate photo, OEM part numbers, quantity and destination port.
Hydraulic parts
Zoomlion Scissor Lift Hydraulic Lift Parts
Lift cylinder, hydraulic power unit, lowering valve and hose sourcing for Zoomlion ZS-series scissor lifts. The suffix on the nameplate decides what you are ordering: HD builds lift through a hydraulic pump unit, DC builds drive electrically, and the two do not share a lift circuit. Size matters as much — the 8 m ZS0808 runs a 24 V / 3.3 kW lifting motor on a 31 s up / 40 s down cycle, the 14 m ZS1414 a 24 V / 4.5 kW motor at 88 s / 60 s, so cylinders and power units are a size class apart. We also cover the ZS0407, ZS0608, ZS0812, ZS1012 and ZS1212 builds; send the full model code including the suffix. The emergency descent valve is a safety component and is quoted only against the machine serial number.
Electrical parts
Zoomlion Scissor Lift Battery and Charger
Battery packs and chargers for Zoomlion ZS-series scissor lifts. One model code covers several different packs: the 8 m ZS0808 ships with either a 4 x 6 V 170 Ah or a 4 x 6 V 225 Ah set and a 24 V / 30 A charger, the 14 m ZS1414 with a 4 x 6 V 220 Ah set, and US-market builds of that machine use a 4 x 12 V 300 Ah configuration instead. Li builds carry a lithium pack with its own battery management system and charger, which is not a drop-in replacement on a lead-acid machine. Quote against the label on the pack currently fitted and the rating plate on the existing charger, not against the machine model alone.
Brake parts
Zoomlion Scissor Lift Drive Motor and Brake Parts
Drive motors, brakes, wheel ends and tyres for Zoomlion ZS-series scissor lifts. There is a trap here worth knowing before you order: both machines are front wheel drive, but the ZS0808 brakes on the front wheels while the ZS1414 brakes on the rear axle. Ordering brake parts by series name gets you the wrong end of the machine. Travel speeds are the same across the range at 3.5 km/h stowed and 0.8 km/h raised, and tyres are ∅381 x 127 mm on both the 8 m and the 14 m machines, so tyres are one of the few items that genuinely do cross the range. Pothole protection linkage parts are quoted separately and only against the machine serial number.
Zoomlion ZS0607 Specifications and Selection Notes
| Work height | 7.8 m |
|---|---|
| Platform height (elevated) | 5.8 m |
| Platform capacity | 230 kg |
| Overall length × width | 1.85 × 0.76 m |
| Overall height (rails down) | 1.79 m |
| Machine weight | 1,425 kg |
| Drive configurations | HD hydraulic drive, DC direct electric drive, Li lithium pack |
How ZS0607 Differs From the Rest of the Range
- The narrow build in the range at 0.76 m overall width — it is specified precisely because it passes through a standard doorway and into most passenger lifts. The ZS0608 reaches the same height on the wider 0.8 m chassis, and scissor arms, platform deck and chassis parts do not interchange between the two. Read all four digits on the nameplate before ordering structural parts.
- At 1,425 kg it is light enough for most indoor floor loadings, which is why it turns up in warehouse, retail and hotel maintenance fleets rather than on construction sites — the wear pattern is drive and control parts, not hydraulics.
- Sold as ZS0607HD, ZS0607DC and ZS0607-Li. The suffix is the drive and power train, not the size: HD lifts through a hydraulic pump unit, DC drives the wheels electrically, Li swaps the lead-acid pack for lithium with its own charger and BMS. These are not interchangeable systems.
Reading height and width from the model code
ZS scissor lift codes are platform height in metres followed by overall chassis width in decimetres, both rounded: ZS0808 is an 8.00 m platform on a 0.81 m chassis, ZS1414 a 13.7 m platform on a 1.40 m chassis, ZS0607 a 5.8 m platform on a 0.76 m chassis. The second pair is the one that decides parts compatibility — ZS0607 and ZS0608 reach the same height on different-width chassis, so their scissor arms, platform decks and chassis parts do not interchange. Trailing letters describe the drive and power train, not the size: HD = hydraulic pump drive, DC = direct electric drive, Li = lithium battery pack.
Compiled from European dealer and rental listings (B-grade source) and cross-checked between two independent sites. Zoomlion does not publish a spec page for this model in English. Confirm against the machine nameplate before ordering.
Commonly Replaced Parts on Zoomlion ZS0607
For Zoomlion ZS0607 scissor lifts, the parts that move are the lift circuit, the battery and charger, and the drive and brake ends. Quotes are confirmed against the full model code including the drive suffix, since HD, DC and Li builds do not share a lift or power train.
- Lift cylinder seal kits, holding valves and emergency lowering valves
- Hydraulic power unit, pump and lift motor parts
- Scissor arm pins, bushings and pothole protection linkage parts
- Battery packs and chargers matched to the pack actually fitted
- Drive motors, brakes and wheel end parts
- Platform control box, proportional controls and tilt sensors
- Load sensing cells and overload cut-out parts
- Non-marking tyres and wheels
- Platform guardrails, entry gates and deck extension parts
This list covers typical wear items for this machine category. Availability for a specific part is always confirmed against the OEM part number.
ZS0607 Sourcing FAQ
Do you supply spare parts for Zoomlion ZS0607?
Yes. Quote-ready ZS0607 parts currently include Zoomlion Scissor Lift Hydraulic Lift Parts, Zoomlion Scissor Lift Battery and Charger, Zoomlion Scissor Lift Drive Motor and Brake Parts and more. Other parts can be confirmed with an OEM part number.
How do I confirm part compatibility for ZS0607?
Send the ZS0607 nameplate photo, engine model and OEM part number. We confirm compatibility before quoting to avoid mismatched shipments.
How are ZS0607 parts shipped?
Parts ship with export packing by sea or air depending on weight, volume and lead time, with destination port costs confirmed in the quote.
What are the most commonly replaced parts on Zoomlion ZS0607?
Frequent replacements on this scissor lift include lift cylinder seal kits, holding valves and emergency lowering valves, hydraulic power unit, pump and lift motor parts, scissor arm pins, bushings and pothole protection linkage parts, battery packs and chargers matched to the pack actually fitted, drive motors, brakes and wheel end parts and more, always confirmed against the OEM part number.