Chinese Equipment Parts for Southern Africa
South Africa, Zambia and DRC open-pit mining and copperbelt fleets
Market Scenario
Southern Africa content focuses on copperbelt and open-pit mining fleets, with XCMG, SANY and LiuGong as the primary quote brands. Shantui and Weichai requests can be reviewed case by case when machine details are available.
Logistics Notes
Heavy components usually move by sea freight; critical electrical and fuel system parts can be shipped by air after confirmation.
Countries
- South Africa
- Zambia
- Democratic Republic of the Congo
Industries
- Open-pit mining
- Copper and cobalt mining
- Mine road maintenance
- Heavy-duty diesel power
Recommended Parts
- Mining truck parts
- Brake valves
- Hydraulic pumps
- Grader cutting edges
- Heavy-duty engine parts
Related brands
- Shantui
- Weichai
Related Products
Hydraulic parts
XCMG Loader Hydraulic Working Pump
Working pump sourcing for XCMG wheel loaders in mining stockyards, road construction and aggregate handling. This is the working (implement) pump that drives the boom and bucket circuit — the steering pump is a separate part with a different displacement, listed on its own page. Some loaders carry two working pumps per machine, so confirm quantity against the machine before ordering.
Hydraulic parts
XCMG Loader Steering Pump
Steering pump sourcing for XCMG wheel loaders. The steering pump feeds the steering circuit only and has a smaller displacement than the working pump on the same machine — the two are not interchangeable even though they look similar and sit on the same pump drive. Quote by machine model plus the code cast on the old pump body.
Brake parts
XCMG Mining Truck Brake System Parts
Brake system parts for XCMG mining transport trucks in copper, bauxite and iron ore operations. There is no single orderable "brake valve" on these trucks: the wet brake circuit is built from accumulators, solenoid, relief, reducing and shuttle valves, plus brake discs, pads and seal kits. Tell us the symptom and the machine serial number and we identify the specific component — note that the XDE130 and the much larger XDE240 run entirely different part number ranges and share almost nothing.
Hydraulic parts
SANY Mining Truck Steering Pump
Steering pump support for SANY mining trucks and heavy transport equipment. The SRT95C is a 95 t rigid mining truck at 65 t empty and 160 t fully loaded, powered by a twelve-cylinder 30.5 L Cummins QST30-C1050 with a 60 m3 body. Nothing on a machine of that mass is a light-vehicle part, and the steering pump sits in a circuit with accumulators and an emergency backup supply rather than working as a standalone pump. That matters for diagnosis: steering that is heavy only at idle, heavy throughout, or has lost assist entirely points at three different components, and only one of the three is the pump. Tell us which of those you have. We quote against the machine serial number and the code cast on the pump body, and it helps to say whether you want the bare pump or the pump with its drive coupling, which is a separate item.
Bucket, blade and ground engaging tools
LiuGong Grader Cutting Edge
Cutting edge and blade wear parts for LiuGong graders used in mine road maintenance. Cutting edges are specified by length, hole spacing, hole count and thickness, and by whether the moldboard takes a curved or a flat edge. The grader model narrows the choice but does not settle it, because moldboard length is an option on both of these machines. Measure the edge on the machine and count the bolt holes — that measurement identifies the part faster than any model number does. End bits wear at a different rate from the main edge and are ordered separately, and the plough bolts and nuts are consumables in their own right: reusing stretched bolts is the most common reason an edge works loose in service and takes the moldboard face with it.