LiuGong Spare Parts
Wheel loaders, excavators and road equipment
Brand Supply Scope
LiuGong loader and excavator parts for quarries, small and medium mining transport, road maintenance and construction fleets.
Share equipment model, engine model, OEM part number, quantity and destination port. Availability and lead time are confirmed only after compatibility checking.
Common models
- CLG835H
- CLG856H
- CLG862H
- CLG922E
- CLG936E
- CLG4180D
Part categories
- Transmission parts
- Axle and drivetrain parts
- Cooling system parts
- Ground engaging tools
LiuGong Quote-Ready Parts
Quotes confirmed after machine model, engine model and part number compatibility checks.
Transmission parts
LiuGong Loader Transmission Clutch
Transmission clutch parts for LiuGong loaders in quarry and mining transport work. These four machines are not one family: the 10 t CLG835H runs a Yuchai YC6J at 92 kW and a 3 t payload, while the 30.6 t CLG890H runs a Cummins QSM11-C350 at 261 kW and 9 t, and the transmission behind each is sized to match. Clutch packs, friction discs and steel plates are identified by the transmission stamped on the gearbox housing rather than by the loader model, and all four of these builds are out of production, which means a machine still working today has often had its gearbox changed at least once. Read the number off the gearbox itself and send that with the machine serial number. Out of production is also why these fleets need aftermarket support in the first place: the machines are still earning, but factory stock is not coming back.
Bucket, blade and ground engaging tools
LiuGong Loader Bucket Teeth
Bucket teeth, adapters and cutting edges for LiuGong loaders working in aggregate and mine loading. Teeth are chosen by the adapter already fitted to the bucket, not by the loader model — a CLG856H that has had a replacement bucket at some point may be running a different tooth system entirely. Send a photograph of the adapter nose and the pin arrangement, and tell us how many teeth are across the lip. Tooth profile is a working decision as much as a part number: a long penetration tooth digs better in bank material and wears out quickly in abrasive rock, while a chisel or rock profile lasts longer but loads the machine harder. Bucket size is not a simple function of machine size here: the CLG835H takes 1.7 m3 and the CLG862H 3.5 m3, but the CLG856H is listed anywhere from 2.7 to 5.6 m3 depending on build, which is exactly why the bucket rather than the loader model has to be the reference point. Tell us the material you are loading and we will say which profile is worth standardising the fleet on.
Hydraulic parts
LiuGong Excavator Main Pump
Main hydraulic pump sourcing for LiuGong excavators used in earthmoving and quarry operations. This listing runs from the CLG913E up to the 46.5 t CLG950E, taking in the 22 t CLG922E at 125 kW and the 36 t CLG936E at 232 kW along the way, and pump displacement scales with the machine, so nothing crosses between them. LiuGong used more than one hydraulic supplier across these builds, so the number cast into the pump body is what actually identifies the part; the excavator model alone is not enough. Before committing to a main pump it is worth confirming the diagnosis, because a pump is the most expensive component on the machine to guess at. Low power and slow cycles are as often a worn regulator, a failed pilot circuit or a main relief set low as they are a scrap pump, and a regulator costs a fraction of a pump. Describe the symptom and we will say what to measure first.
Bucket, blade and ground engaging tools
LiuGong Grader Cutting Edge
Cutting edge and blade wear parts for LiuGong graders used in mine road maintenance. Cutting edges are specified by length, hole spacing, hole count and thickness, and by whether the moldboard takes a curved or a flat edge. The grader model narrows the choice but does not settle it, because moldboard length is an option on both of these machines. Measure the edge on the machine and count the bolt holes — that measurement identifies the part faster than any model number does. End bits wear at a different rate from the main edge and are ordered separately, and the plough bolts and nuts are consumables in their own right: reusing stretched bolts is the most common reason an edge works loose in service and takes the moldboard face with it.
Cooling system parts
LiuGong Loader Radiator
Radiator, fan and cooling system parts for LiuGong wheel loaders in hot and dusty sites. Cooling packs follow the engine rather than the loader: the CLG835H carries a Yuchai YC6J while the CLG856H and CLG862H both carry a Cummins QSL9.3, so the core, the fan and the shroud differ between the small machine and the two larger ones even though all three are LiuGong loaders. Send the engine plate along with the machine model. On quarry and haul road work the usual cause of a cooling complaint is not a failed radiator at all but a core packed solid with dust between the fins, or a hydraulic oil cooler mounted ahead of it doing the same thing — both are worth checking before buying a core. If a core is being replaced anyway, ask about a wider fin pitch: it blocks far less readily in dusty air, at a small cost in cooling area.
Send LiuGong part numbers for a quote
All manufacturer names, brand names, part numbers and logos are used for reference and identification purposes only. This site is not an authorized dealer of the brands mentioned unless explicitly stated.
Request a Parts Quote