Yuchai YC6J Engine Parts
Quote after compatibility confirmation by machine model, engine model and part number.
Sourcing Parts for Yuchai YC6J
The pages below cover common wear and maintenance parts for Yuchai YC6J. Every quote is confirmed against the machine nameplate, engine model and OEM part number to avoid mismatched shipments.
To get a quote, send the YC6J nameplate photo, OEM part numbers, quantity and destination port.
Gasket and overhaul kits
Yuchai Engine Overhaul Kit
Overhaul kits for Yuchai engines used in loaders, trucks, small mining equipment and gensets. Yuchai part numbers are tied to the specific calibration, not to the series name: YC6A covers dozens of builds such as YC6A260-T302 and YC6A240-T300, and compression ratio, pistons and head gasket thickness can differ between them. There is no single kit that covers YC4D, YC6B, YC6J and YC6A together — a four-cylinder YC4D shares nothing with a six-cylinder YC6A. Send the complete engine nameplate code and the engine serial number and we build the kit for that engine.
Fuel injector and fuel pump
Yuchai Fuel Injector
Fuel injector matching for Yuchai diesel engines, quoted by engine nameplate and injector part number. Yuchai injectors follow the calibration, not the series: YC6A alone covers dozens of builds such as YC6A260-T302 and YC6A240-T300, and injector flow rating differs between them although the engine looks the same from outside. The four-cylinder YC4E and the six-cylinder YC6L share nothing here. We ask for the number stamped on an injector already fitted as well as the engine nameplate, because on a machine that has been repaired before, what is in the engine is often not what left the factory, and matching the running set matters more than matching the original specification. Injectors are supplied as a set for a reason: one new injector against five worn ones leaves the engine running unevenly and the new one doing more work than it should.
Turbocharger
Yuchai Turbocharger
Turbocharger supply for Yuchai engines working in construction equipment and generator sets. The turbo is matched to the power rating rather than the engine series — one YC6J family covers several ratings and each is turned with a different compressor and turbine trim. This listing also spans the 10.338 L six-cylinder YC6MK and much smaller four-cylinder YC4D units, which have nothing in common. What identifies a turbo reliably is the plate on the turbo housing itself, so send a photograph of that alongside the engine plate. Before ordering, one thing is worth checking: repeat turbo failures are almost always an oil supply or air filtration problem rather than a bad turbo, and a second new unit will fail the same way if the cause is still there.
Water pump and oil pump
Yuchai Water Pump
Cooling water pumps for Yuchai engines in construction, mining support and genset applications. This listing covers four different engines, from the four-cylinder YC4D up to the YC6108G, and the pump differs by series and usually by build within a series. Pulley diameter and groove count follow what the machine has to drive, so two engines carrying the same model code can take different pumps. Send the engine nameplate, the number cast into the old pump body, and a photograph that shows the pulley. Say also whether you want a bare pump or one with the pulley already pressed on — pressing a pulley in the field without the right tooling is the usual way a new pump gets damaged before it ever runs.
Starter and alternator
Yuchai Starter Motor
Starter motors for Yuchai engines, checked by voltage, mounting type and engine model. Four things decide the part and the engine model is only one of them: system voltage (12 V on the smaller four-cylinder builds, 24 V on most six-cylinder and genset applications), the number of mounting bolts and their spacing, the tooth count on the pinion, and whether the unit is reduction geared or direct drive. Count the pinion teeth and the mounting bolts on the old unit before ordering; those two numbers settle most enquiries on their own. One diagnostic point: if the engine turns over slowly rather than not at all, check the batteries and the earth strap first. A large share of the starters we are asked to replace are working correctly.
Commonly Replaced Parts on Yuchai YC6J
For Yuchai YC6J diesel engines in construction machines, trucks and generator sets, these part groups are quoted most often. Confirm the engine nameplate before ordering.
- Overhaul kits: pistons, liners, rings, bearings and full gasket sets
- Fuel system: injectors, injection pump and common rail parts
- Turbocharger and intake system parts
- Water pump, thermostat and cooling system parts
- Oil pump and lubrication system parts
- Starter motor and alternator by voltage and mounting type
- Cylinder head, valves and valve train parts
- Filter sets: oil, fuel, air and water separator elements
This list covers typical wear items for this machine category. Availability for a specific part is always confirmed against the OEM part number.
YC6J Sourcing FAQ
Do you supply spare parts for Yuchai YC6J?
Yes. Quote-ready YC6J parts currently include Yuchai Engine Overhaul Kit, Yuchai Fuel Injector, Yuchai Turbocharger and more. Other parts can be confirmed with an OEM part number.
How do I confirm part compatibility for YC6J?
Send the YC6J nameplate photo, engine model and OEM part number. We confirm compatibility before quoting to avoid mismatched shipments.
How are YC6J parts shipped?
Parts ship with export packing by sea or air depending on weight, volume and lead time, with destination port costs confirmed in the quote.
What are the most commonly replaced parts on Yuchai YC6J?
Frequent replacements on this diesel engine include overhaul kits, fuel system, turbocharger and intake system parts, water pump, thermostat and cooling system parts, oil pump and lubrication system parts and more, always confirmed against the OEM part number.